Televés 532123 Avant X Pro antenniverkon ohjelmoitava päävahvistin, 4xUHF/VHF/FM, AGC, 122 dBµV, LTE700 ready

Arvioitu saapumisaika 3 päivässä tilauksesta
SKU
532123

Nopeasti ja helposti asennettava pienikokoinen ohjelmoitava päävahvistin.

399,90 €
Erämaksu ei ole käytettävissä tällä ostoksen hinnalla

Televés Avant X Pro on taloyhtiön päävahvistin. 75 dB maksimi vahvistus ja AGC (Automatic Gain Control) säätää automaattisesti vahvistuksen optimaaliseksi joka hetki. Suuren vahvistuksen ansiosta Avant X pro riittää yksinään vahvistimeksi jopa 20 asunnon kohteeseen. Mikäli kohde on isompi, tarvitset lisävahvistimen (katso alta).

Televesin Avant X Pro:ssa on päävahvistin ja kanavanvaihtaja samassa laitteessa. Yhteensopiva DVB-T ja DVB-T2 signaalien kanssa. Voit määritellä vastaanotettavat kanavat ja tarvittaessa muuttaa niiden taajuutta. 

Nopea ja helppo asennus automaattisella ohjelmoinnilla. Painat vain yhtä nappia.

  • 4 x VHF/UHF -sisääntuloa, joissa kaikissa on jännitteensyöttö 12V/50mA. 4-tulossa lisäksi DAB.
  • VHF/UHF maksimi vahvistus 75dB, sisääntulotaso saa olla 40-100dB
  • 1 x FM -sisääntulo
  • 32 x ohjelmoitavaa suodinta (laajennettavissa neljälle vierekkäiselle kanavalle)
  • Automaattinen vahvistuksensäätö (AGC) on realiaikainen jokaiselle suodattimelle
  • Selektiiviset suotimet VHF/UHF alueella (30dB 1 MHz:ssä)
  • Digitaaliset kanavanvaihtajat jokaiselle suotimelle
  • 4G/5G LTE-automaattisuodatin jokaiselle tulolle
  • Korkea ulostulotaso, jopa 122 dBuV (DIN45004B)
  • Yhteensopiva DVB-T ja DVB-T2 signaalien kanssa
  • Automaattinen ohjelmointi yhtä nappia painamalla
  • Vahvistimen ohjelmointi voidaan tehdä PC:llä, Android älypuhelimella/tabletilla tai Televes ohjelmoitilaitteella
  • Asetuksien kloonaus: tallenna ja lataa asetukset PC:n, älypuhelimen tai tabletin kautta
  • Tulosignaalien seuranta ja PDF-raporttien luominen
  • Zamak-runko (sinkkiseos), joka takaa maksimaalisen suojan ulkoisilta häiriöiltä
  • Erittäin pieni koko (225x120x55 mm)
  • Helposti vaihdettava virtalähde
Tekniset tiedot
Tuotemerkki Televés
Valmistajan tuotekuvaus

A new evolutionary stage

Multi-input multiband amplifier, perfect for terrestrial individual or MDU (Multi Dwelling Unit) installations, that allows programming up to 32 digital filters on 4 VHF+UHF inputs (DTT).
The multiband amplifier is equipped with 5 inputs, allowing its configuration between 2 distribution modes: FM-4xVHF/UHF or FM-DAB-3xUHF, and can achieve programmable amplification and balancing of the different RF inputs.
Thanks to ASuite, the multiband amplifier programming is very easy and intuitive using an Android or Windows application.
The Pro model includes the autoprogramming function that allows the multiband amplifier to self-program and self-adjust. The LED indicators on the equipment follow the procedure, displaying whether it was executed successfully
Besides, it allows VHF/UHF signal monitoring of both level and SNR (Signal to Noise Ratio) and produces an installation report (PDF file).

 

The multiband amplifier is able to detect LTE signals and automatically set the filter to channel 48 (LTE700).

RED compliant

Highlights
  • Digital processing technology implemented on terrestrial TV signals
  • Up to 32 individually programmable filters: single channel digital filtering, even for adjacent channels (1 to 4 channels)
  • Digital processing of channels: output channels can be frequency shifted
  • Automatic signal adjustment in each filter (AGC): and output signal manual regulation
  • UHF/VHF digital filters with high selectivity: 30dB rejection (@ 1MHz)
  • SAW filters (Surface Acoustic Wave) against LTE interferences, with the best selectivity and stability
  • Compatible with DVB-T and DVB-T2
  • TForce Technology: terrestrial signal level always stable and adapted to its optimum value
  • Storage of several setups and cloning between different AVANT X models
  • Zamak chassis provides high screening effect
  • Light-weight and compact multiband amplifier with a wide range of features (225x120x55mm)
  • Very easy configuration and adjustment using ASuite application for Android or Windows

 

Main features
  • Inputs configurable in 2 modes: 4 inputs support VHF/UHF, or one of the inputs is for DAB and the remaining 3 for UHF
  • Automatic balancing according to the programmed output level and equalization slope
  • High output power
  • Allocation of filters to inputs without restraints
  • Auto-programming: The amplifier self scans the VHF/UHF inputs to find the best DVB-T/T2 channel, so it can automatically allocate each multiplex to a filter in the most optimum way
  • Using ASuite application: Channel monitoring with DVB-T/T2 parameters: identification, level, CNR, CBER (DVB-T) or PER (DVB-T2) and installation PDF report with settings and measures ( Donwload: PDF report example)
  • Powering of pre-amplifiers or BOSS system
  • LED indicators displaying both unit and signal statuses
  • Easy-to-replace power supply

 

Discover

Avant X: A new evolutionary stage

Avant X is a full range of digital programmable multiband amplifiers, which main mission is to achieve a programmable amplification and balance of different RF input signals.

  • VHF+UHF inputs: the channels present in these inputs can be filtered and adjusted using up to 32 digital filters. Each filter can be tuned to any VHF+UHF channel, and its bandwidth can comprise between 1 and 4 channels.
    The arrangement of the 32 filters is configurable based on the number of channels present on each VHF+UHF input. It's compatible with DVB-T and DVB-T2.
    The output level is programmable between 90-115dBμV for one-output options (BASIC and PRO), and between 86-111dBμV for two-output options (BASIC SAT and PRO SAT). Furthermore, an equalization slope of up to 5 dB can be programmed at the output.
  • The FM input can be enabled or not. In case this input is enabled, it will be amplified and its output level set to 10 dB below the lowest-level UHF channel (taking into account the equalization slope).
  • IF input (only for models equipped with SAT): satellite input can be assigned an attenuation between 0 dB and 30dB, and an equalization between 0 dB and 15dB. The LNB can be configured to be REMOTELY (user STB) or LOCALLY powered by enabling the 22 kHz tone and configuring the supply voltage value to 13 or 17 V.

Choose the desired programming mode...

Avant X provides three different programming options:

  • App ASuite for PC/Mac or tablet/Android smartphone, via USB connection (OTG cable included): The multiband amplifier configuration is performed in a friendly and intuitive environment. A configuration can be defined and stored - even without being connected to the multiband amplifier - only to retrieve it at installation and adjustment time.
    Furthermore, for PRO versions, the application allows the monitoring of the quality parameters and the production of an installation report describing the configuration used.
  • Universal programmer (ref. 7234): The unit is compatible with the programmer, ensuring backwards compatibility.
  • Automatic programming by means of the "AUTO-PROGRAMMING" button (press and hold) of the multiband amplifier itself (PRO versions only): Thanks to a tuner that is able to detect DVB-T/T2 channels for UHF+VHF inputs, the unit performs an automatic programming of the filters when executing this option, as well as the appropriate tuning to avoid intermodulation.

By pressing the READJUST button (short press), the unit is readjusted to the stored configuration values.
After the multiband amplifier is adjusted, a manual fine tuning can be performed to slightly correct the VHF/UHF and FM filters' gain.

Inputs Mode 1   4x VHF+UHF 1x FM
Mode 2 3x UHF 1x DAB
Frequency range Mode 1 MHz 174 – 230 / 470 – 694 87 – 108
Mode 2 470 – 694 174 – 230
Nr. of filters Mode 1   32 -
Mode 2 31 1
Nr. of channels per filter Mode 1   1 – 4 -
Mode 2 1 – 4 Ch5 – Ch12
Maximum gain Mode 1 dB 75 29
Mode 2 75 72
Gain regulation dB AGC 0 – 25 / OFF
Manual regulation after auto-adjustment Mode 1 dB ± 3 ± 5
Mode 2 ± 3 ± 5
Slope regulation Mode 1 dB 0 – 5 -
Mode 2 0 – 5 -
Input level dBμV 40 – 100 76 – 101
Output level (DIN45004B) Mode 1 dBμV 122 122
Mode 2 122 119
Output level (EN50083) Mode 1 dBμV 126 126
Mode 2 126 123
Programmable output level Mode 1 dBμV 87 – 111 / 90 – 115 80 – 105
Mode 2 90 – 115 87 – 112
Noise figure Mode 1 dB 7 / 6 7
Mode 2 6 7
Selectivity dB >65 (± 8MHz) >20 (± 20MHz)
Input powering Vdc 12 (AUTO/ON/OFF) -
Maximum current per input mA 50 50 50 50 -
Mains voltage Vac 220 – 230
Mains frequency Hz 50 – 60
Maximum current mA 130
Total consumption W 14
Protection index IP 20
Operating temperature ºC -5 ... +45
EAN 8424450223963
DVB-yhteensopivuus DVB-T (antenni), DVB-T2 (antenni HD)
Vahvistin (dB) 75
Tuotteen korkeus (mm) 120
Tuotteen leveys (mm) 225
Tuotteen syvyys (mm) 55
Valmistajan tuotelinkki https://www.televes.com/
Valmistusmaa Espanja
Takuu 24 kk
Ratings & Reviews

Ole ensimmäinen tuotteen arvostelija

Ratings & Reviews

Ole ensimmäinen tuotteen arvostelija

Copyright © 2010 SatShop.fi. All rights reserved.