Televés 532133 Avant X Pro SAT antenniverkon ohjelmoitava päävahvistin, 4xUHF/VHF/FM/SAT, AGC, 122 dBµV, LTE700 ready

Arvioitu saapumisaika 3 päivässä tilauksesta
SKU
532133

Monikaistavahvistin pystyy tunnistamaan LTE-signaalit ja asettamaan suodattimen automaattisesti kanavalle 48 (LTE700). RED-yhteensopiva.

419,90 €

Televés Avant X Pro Sat on taloyhtiön päävahvistin. 75 dB maksimi vahvistus ja AGC (Automatic Gain Control) säätää automaattisesti vahvistuksen optimaaliseksi joka hetki. Suuren vahvistuksen ansiosta Avant X pro sat riittää yksinään vahvistimeksi jopa 20 asunnon kohteeseen. Mikäli kohde on isompi, tarvitset lisävahvistimen (katso alta).

Televesin Avant X Pro:ssa on päävahvistin ja kanavanvaihtaja samassa laitteessa. Yhteensopiva antenni sekä sateliitti signaalien kanssa. Voit määritellä vastaanotettavat kanavat ja tarvittaessa muuttaa niiden taajuutta. 

Tekniset tiedot
Tuotemerkki Televés
Valmistajan tuotekuvaus

A new evolutionary stage

Multi-input multiband amplifier, perfect for terrestrial individual or MDU (Multi Dwelling Unit) installations, that allows programming up to 32 digital filters on 4 VHF+UHF inputs (DTT).
The multiband amplifier is equipped with 6 inputs, allowing its configuration between 2 distribution modes: FM-4xVHF/UHF-SAT or FM-DAB-3xUHF-SAT, and can achieve programmable amplification and balancing of the different RF inputs. Equipped with 2 outputs: one terrestrial and one terrestrial+satellite.
Thanks to ASuite, the multiband amplifier programming is very easy and intuitive using an Android or Windows application.
The Pro model includes the autoprogramming function that allows the multiband amplifier to self-program and self-adjust. The LED indicators on the equipment follow the procedure, displaying whether it was executed successfully
Besides, it allows VHF/UHF signal monitoring of both level and SNR (Signal to Noise Ratio) and produces an installation report (PDF file).

 

The multiband amplifier is able to detect LTE signals and automatically set the filter to channel 48 (LTE700).

RED compliant

Highlights
  • Digital processing technology implemented on terrestrial TV signals
  • Up to 32 individually programmable filters: single channel digital filtering, even for adjacent channels (1 to 4 channels)
  • Digital processing of channels: output channels can be frequency shifted
  • Automatic signal adjustment in each filter (AGC): and output signal manual regulation
  • UHF/VHF digital filters with high selectivity: 30dB rejection (@ 1MHz)
  • SAW filters (Surface Acoustic Wave) against LTE interferences, with the best selectivity and stability
  • Compatible with DVB-T and DVB-T2
  • TForce Technology: terrestrial signal level always stable and adapted to its optimum value
  • Storage of several setups and cloning between different AVANT X models
  • Zamak chassis provides high screening effect
  • Light-weight and compact multiband amplifier with a wide range of features (225x120x55mm)
  • Very easy configuration and adjustment using ASuite application for Android or Windows

 

Main features
  • Inputs configurable in 2 modes: 4 inputs support VHF/UHF, or one of the inputs is for DAB and the remaining 3 for UHF
  • Automatic balancing according to the programmed output level and equalization slope
  • High output power
  • Allocation of filters to inputs without restraints
  • Auto-programming: The amplifier self scans the VHF/UHF inputs to find the best DVB-T/T2 channel, so it can automatically allocate each multiplex to a filter in the most optimum way
  • Using ASuite application: Channel monitoring with DVB-T/T2 parameters: identification, level, CNR, CBER (DVB-T) or PER (DVB-T2) and installation PDF report with settings and measures ( Donwload: PDF report example)
  • Powering of pre-amplifiers or BOSS system
  • LED indicators displaying both unit and signal statuses
  • Easy-to-replace power supply
  • Two powering modes on the SAT input: local or remote

 

Discover

Avant X: A new evolutionary stage

Avant X is a full range of digital programmable multiband amplifiers, which main mission is to achieve a programmable amplification and balance of different RF input signals.

  • VHF+UHF inputs: the channels present in these inputs can be filtered and adjusted using up to 32 digital filters. Each filter can be tuned to any VHF+UHF channel, and its bandwidth can comprise between 1 and 4 channels.
    The arrangement of the 32 filters is configurable based on the number of channels present on each VHF+UHF input. It's compatible with DVB-T and DVB-T2.
    The output level is programmable between 90-115dBμV for one-output options (BASIC and PRO), and between 86-111dBμV for two-output options (BASIC SAT and PRO SAT). Furthermore, an equalization slope of up to 5 dB can be programmed at the output.
  • The FM input can be enabled or not. In case this input is enabled, it will be amplified and its output level set to 10 dB below the lowest-level UHF channel (taking into account the equalization slope).
  • IF input (only for models equipped with SAT): satellite input can be assigned an attenuation between 0 dB and 30dB, and an equalization between 0 dB and 15dB. The LNB can be configured to be REMOTELY (user STB) or LOCALLY powered by enabling the 22 kHz tone and configuring the supply voltage value to 13 or 17 V.

Choose the desired programming mode...

Avant X provides three different programming options:

  • App ASuite for PC/Mac or tablet/Android smartphone, via USB connection (OTG cable included): The multiband amplifier configuration is performed in a friendly and intuitive environment. A configuration can be defined and stored - even without being connected to the multiband amplifier - only to retrieve it at installation and adjustment time.
    Furthermore, for PRO versions, the application allows the monitoring of the quality parameters and the production of an installation report describing the configuration used.
  • Universal programmer (ref. 7234): The unit is compatible with the programmer, ensuring backwards compatibility.
  • Automatic programming by means of the "AUTO-PROGRAMMING" button (press and hold) of the multiband amplifier itself (PRO versions only): Thanks to a tuner that is able to detect DVB-T/T2 channels for UHF+VHF inputs, the unit performs an automatic programming of the filters when executing this option, as well as the appropriate tuning to avoid intermodulation.

By pressing the READJUST button (short press), the unit is readjusted to the stored configuration values.
After the multiband amplifier is adjusted, a manual fine tuning can be performed to slightly correct the VHF/UHF and FM filters' gain.

Number of inputs   6
Number of outputs   2
Bands  
FM DAB UHF SAT
Frequency range MHz
87 ... 108 174 ... 230 470 ... 694 950 ... 2150
Number of filters  
-- 1 31 --
Channels per filter  
-- -- 1 ... 4 --
Gain dB
25 68 71 41
Gain adjustment range dB
0 ... 25 AGC AGC 0 ... 30
Manual regulation after auto-adjustment dB
-5 ... 5 -5 ... 5 -3 ... 3 --
Slope regulation dB
-- -- 0 ... 5 0 ... 15
Input level dBμV
76 ... 101 40 ... 100 40 ... 100 --
Output level DIN45004B dBμV
118 115 118 --
Output level EN50083 dBμV
122 119 122 123
Programmable output level dBμV
76 ... 101 83 ... 108 86 ... 111 --
Noise figure dB
7 7 6 --
Selectivity dB
> 20 > 65 > 65 > 40
Powering per inputs Vdc
-- 12 12 13 ... 17
Max current input mA
-- 70 70 --
Max. local current for LNB mA 200
Max. remote current for LNB mA 400
Input voltage Vac 110 ... 230
Mains frequency   50 Hz / 60 Hz
Max. current mA 350
Max. power consumption W 14
Protection index   20
Operating temperature °C -5 ... 45
DVB-yhteensopivuus DVB-S (satelliitti), DVB-S2 (satelliitti HD), DVB-T (antenni), DVB-T2 (antenni HD)
Valmistusmaa Kiina
Takuu 24 kk
Ratings & Reviews

Ole ensimmäinen tuotteen arvostelija

Ratings & Reviews

Ole ensimmäinen tuotteen arvostelija

Muita tuotteita joista saatat olla kiinnostunut
Copyright © 2010 SatShop.fi. All rights reserved.