Johansson 9645KIT Stacker

Details

Stacker / deStacker:
merges two coax lines into a coax line and can be used wherever a second coax line can not be installed.
Suitable for multi-feed systems:
The Johannson 9645 Stacker / deStacker can be used for cable lengths up to 50 meters. The input frequencies 1 x (5-2150 Mhz) and 1 x (950-2150 Mhz) are stacked (to stack) and transported in the 5-3550 Mhz range over only one coax line. At the end of the line, the "deStacker" is used and then destacked again into two coax lines.
It is then possible to operate two single receivers or one twin receiver without function restriction!
Stacker / deStacker works in conjunction with twin or quad LNB's, or can be connected to a multi-switch. The terr. Signal (47-950 MHz) is also transmitted.

Important installation instructions:
- Mount the stacker as close as possible to the LNB
- Maximum cable length between Stacker / deStacker 50-70m
- No stacks or distributors may be installed between Stacker and deStacker

Technical specifications:
Stacker
Entrance LNB 1 950 - 2150 Mhz.
Input LNB 2 5 - 2150 Mhz.
Output 5 - 3550 Mhz.
Input level max. <88 dBμV
Dimensions 125 x 115 x 45mm
Power is supplied by deStacker

agricultural least:
Entrance 5 - 3550 Mhz.
Output LNB 1 5 - 2150 Mhz.
Output LNB 2 950 - 2150 Mhz.
Dimensions 140 x 90 x 40mm
Damping Ter. -1dB / Sat -4dB
Converted Sat + 5dB
Current consumption 0.7W.
Power supply via receiver

Delivery:
- Stacker
- deStacker
- Cable ties

More Information

Brand

Johansson

Manufacturer's description

Two input Band stacking Multi Band Converter

The Stacker-Destacker is the perfect solution to upgrade an old single-cable system with a twin LNB (or quad + DiSEqC switch ref 9920) to be used in combination with a dual input receiver (PVR) or 2 separate single input receivers.<br />
No power adapter needed. Power the device with the satellite receiver.
Wall / mast mounting with strap

9645
		Stacker	Destacker
Inputs	-	2	1
Input frequency	MHz	5-2150 MHz / 950-2150 MHz	5-3550 MHz with "F" High Quality connector
Output	-	1	2
Output	MHz	5-3550 MHz with "F" High Quality connector	5-2150 MHz / 950-2150 MHz
Insertion loss / gain	dB	-1 @ 5-862 MHz -3 @ 950-2150Mhz Converted Sat. Pos. 1 (0 dB) = +6 Converted Sat. Pos. 2 (10 dB att.) = +4	-1 @ 5-862 MHz -3 @ 950-2150Mhz Converted Sat. = +5
Max. Input level	dBµV	pos. 1 (0dB) = 88 Pos. 2 (10 dB att.) = 98	-
Consumption	W	160 max. Optional power adapter available for more LNB current Ø 2.1mm
Dimensions	mm	125 x 115 x 45	150 x 90 x 40
General specification	-	Operating system up to 75m CT100 or 17 VAtC coaxial cable