Inverto Black Mono Single Monoblock Universal LNB, 13E+16E+19E, for 90cm satellite antenna

Estimated arrival time within 2 weeks of your order
SKU
IDLM-SINM20-TRPMN-8PP
Excellent quality LNB for 3 satellites and with 1 output.
€24.90
Single Monoblock from the best manufacturer. Our best single monoblock LNB for 3 degrees. With this LNB and a 90cm dish you can receive 3 satellites in 1 receiver. Suitable for Astra 19.2E, 16E and Hotbird 13E. Built-in DiSEqC switch. Please check that your receiver is at least DiSEqC 1.0 compatible. Highly recommended.

Installation: Install the monoblock LNB. Go to receiver menus and choose that DiSEqC mode is 1.0. Select that DiSEqC A (or 1) -port is 16E and DiSEqC B (or 2) port is Hotbird 13E and DiSEqC C (or 3) port is Astra 19.2E. If you receive other satellites, then just select that the satellite that is more to the west is in port A/1 and the satellite that is more to the east is in port B/2.

LNB has 3 pcs 23mm necks. 40mm and 60mm adapters included. Can be installed to Inverto 90cm satellite antenna with included 40mm adapter.
More Information
Brand Inverto
Manufacturer's description

This Triple Feed LNB is a monoblock LNBF for Ku-band satellite reception from orbital positions 13˚E, 16˚E and 19.2˚E in Central European countries. It is intended to be installed with commercially available satellite dishes that have the following characteristics:

 

• 85cm wide parabolic offset reflector

• 40mm feed clamp with ~7mm profile (the LNB will be supplied with 40mm ring adaptor)

• F/D = 0.6

 

It features a frequency range of 10.7 to 12.75GHz divided into Low Band (10.70 to 11.70GHz) and High Band (11.70 to 12.75GHz). It receives waves with horizontal and vertical polarization. The LNB provides one switchable IF outputs (Single model). The output carries also power supply and control signals. Output port is F type. DiSEqC1.0 commands allow switching the output to a particular band and orbital position.

 

The DiSEqC ODU allocation is the following: "ODU A" corresponds to 16E, "ODU B" to 13E and "ODU C" to 19.2E. As long as no DiSEqC command has been received, the selected orbital position is 16E (ie DiSEqC A). The LNB comprises three feeds, one for each orbital position. The feeds allow mounting into the feed clamp of the satellite dish. The feeds will be marked with “13˚E”, “16˚E” and “19.2˚E” respectively.

 

The DISEqC positions (A/B/C) and the respective orbital positions (16E/13E/19.2E) are marked on the LNB housing. The LNB is supplied with 40mm plastic ring adapter.


Product Specifications
draw

 

Low Band Input Frequency Range 10.7 ~ 11.7 GHz
        O/P Frequency Range 950 ~ 1950 MHz
        LO Frequency   9.75 GHz
        Noise Figure 1.0(max) dB
High Band Input Frequency Range 11.7 ~ 12.75 GHz
        O/P Frequency Range 1100 ~ 2150 MHz
        LO Frequency   10.6 GHz
        Noise Figure 1.0(max) dB
LO Initial Accuracy ± 1.0 MHz
LO Temperature Drift ± 3.0 MHz
LO Phase Noise @ 1K Hz -55 dBc / Hz
LO Phase Noise @ 10K Hz -80 dBc / Hz
LO Phase Noise @ 100K Hz -100 dBc / Hz
Conversion Gain 50 ~ 62 dB
Gain Variation 6 [max] dB
Output 1 dB Compression Point 0.0 [min.] dBm
Crosstalk Isolation 20 (min)dB
Output VSWR 2.5 : 1~
Output Spurious (inter-modulation) -55 [max] dBm
DC Power 10~20/150 [ max.] DCV/mA
Working Temperature - 30 ~ + 60 °C
Output Impedance 75 Ω 
Polarity , Band & Satellite Selection V, L, 16°E 13V, 0kHz, DiSEqC1.0: Sat A
Polarity , Band & Satellite Selection V, H, 16°E 13V, 22kHz, DiSEqC1.0: Sat A
Polarity , Band & Satellite Selection H, L, 16°E 18V, 0kHz, DiSEqC1.0: Sat A
Polarity , Band & Satellite Selection H, H, 16°E 18V, 22kHz, DiSEqC1.0: Sat A
Polarity , Band & Satellite Selection V, L, 13°E 13V, 0kHz, DiSEqC1.0: Sat B
Polarity , Band & Satellite Selection V, H, 13°E 13V, 22kHz, DiSEqC1.0: Sat B
Polarity , Band & Satellite Selection H, L, 13°E 18V, 0kHz, DiSEqC1.0: Sat B
Polarity , Band & Satellite Selection H, H, 13°E 18V, 22kHz, DiSEqC1.0: Sat B
Polarity , Band & Satellite Selection V, L, 19.2°E 13V, 0kHz, DiSEqC1.0: Sat C
Polarity , Band & Satellite Selection V, H, 19.2°E 13V, 22kHz, DiSEqC1.0: Sat C
Polarity , Band & Satellite Selection H, L, 19.2°E 18V, 0kHz, DiSEqC1.0: Sat C
Polarity , Band & Satellite Selection H, H, 19.2°E 18V, 22kHz, DiSEqC1.0: Sat C
LNB type Single, Monoblock 3°, Monoblock 3° + 3°, Universal, Ku-band
HDTV receiver Yes
DVB-compatibility DVB-S (satellite), DVB-S2 (satellite HD)
Polarization Linear (H/V)
Noise figure (dB) 0.2
LNB neck diameter (mm) 60
Product height (mm) 97
Product width (mm) 140
Product depth (mm) 109
Manufacturer product link http://www.inverto.tv/
Country of Manufacture China
Warranty 60 months
Ratings & Reviews

Be the first to review this product

Ratings & Reviews

Be the first to review this product

Copyright © 2010 SatShop.fi. All rights reserved.