Inverto Black Mono Single Monoblock Universal LNB, 3°, for 80cm satellite antenna

Details

Single Monoblock from the best manufacturer. Our best single monoblock LNB for 3 degrees. With this LNB and an 80cm dish you can receive 2 satellites in 1 receiver. Suitable for Astra 19.2E and 16E or 16E and Hotbird 13E. Built-in DiSEqC switch. Please check that your receiver is at least DiSEqC 1.0 compatible. Highly recommended.

You also need a 60mm LNB holder and Inverto 80cm or Triax TD78 satellite antenna (check beside).

Installation: Install 60mm LNB holder. Install the monoblock LNB to the holder. Go to receiver menus and choose that DiSEqC mode is 1.0. Select that DiSEqC A (or 1) -port is eastern satellite and DiSEqC B (or 2) port is western satellite.

More Information

Brand

Inverto

Manufacturer's description

Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception. It can be used for satellite broadcast reception (on an 80cm dish antenna) of any two satellites spaced with 3° . It enables its distribution to a Set Top Box with Single Tuner. The LNB is optimized for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.

Main Features

• Low Phase Noise, DVB-S2 (HDTV) compliant

• Low Noise Figure (0.2 dB)

• Low Power Consumption

• Very high Cross Polarization Isolation

• Very high Frequency Stability

Product Specifications

Low Band Input Frequency Range	10.7 ~ 11.7 GHz
Low Band Output Frequency Range	950 ~ 1950 MHz
Low Band LO Frequency	9.75 GHz
High Band Input Frequency Range	11.7 ~ 12.75 GHz
High Band Output Frequency Range	1100 ~ 2150 MHz
High Band LO Frequency	10.6 GHz
Noise Figure	0.2 dB Typ. (0.7 dB Max.)
LO Initial Accuracy	+/- 1.0 MHz Max.
LO Temperature Drift	+/- 3.0 MHz Max.
Phase Noise (@ 10 kHz)	- 90 dBc / Hz Max.
Conversion Gain	50 ~ 65 dB
Gain Ripple (Over 26 MHz Bandwidth)	+/- 0.75 dB
Gain Variation (Over Full Band)	+/- 4 dB Max.
Image Rejection	40 dB Min.
1 dB Compression Point (@ Output)	0.0 dBm Min.
Control: Satellite A/B Selection	DiSEqC 1.0 (Sat A* = Eastern Satellite Position, Sat B = Western Satellite Position)
Cross Polarization Isolation	22 dB Min.
Output VSWR	2.5 : 1
In-Band Spurious	- 60 dBm Max.
Current Consumption	120 mA Max. @ 11 ~ 20 V
Operating Temperature	- 30 °C ~ + 60 °C
Output Impedance	75 Ω
Output Connector	F-Type (Female)
Weight	220 g
Recommended Dish Size	75 ~ 85 cm (F/D = 0.6)
Monoblock Mounting Bracket	60 mm