Televés 531911 Programmable 3xUHF/VHF Amplifier and Combiner, Bluetooth, 45 dB, 1 output, LTE700 & LTE800 protected

SmartKom launches as an amplifier with digital channel filtering for systems
with a small number of outlets, to be installed on a mast in an outdoor housing.
This solution requires an F power supply unit to be installed indoors.
This mast amplifier is fitted with 3 VHF+UHF inputs that allows automatic/
manual setup with 32 filters. Additionally, it has remote powering through the
output connector, 5G LTE filtering and short-circuits protection. It also includes
a mixed FM input.
Each of the 32 filters has high selectivity that allows the balancing of adjacent
channels. It has individual AGC and it can be programmed to filter any VHF
channel (5 to 12) and UHF (21 to 48) . Channels are automatically balanced according
to the output level.
For self-programming, press and hold (+5 sec.) the “READJUST” button. This
function allows for channel scanning through the connected inputs. After that,
levels need to be adjusted. When the scanning process is started, powering
through input is enabled. The green LED will flash slowly to indicate that DVB-T/
T2 channels are being scanned through the connected inputs and that the unit
is being configured according to the channels that have been already found.
Once the scanning is completed, the LED will flash faster to confirm the unit adjustment.
A steady light indicates that the process is completed.
Channels already programmed/found can be also adjusted by the unit. If this is
the case, a short press of the button (<3 sec).
The indoor power source is equipped with two mixed TV-MIX and SAT-MIX inputs.
The TV-MIX input allows bypass of the signals coming from the external amplifier
to the output. It features a 12V power supply with short-circuit protection.
The SAT-MIX input allows SAT bypass coming from an LNB while allowing the
power supply from the STB.
This power supply features a “READJUST” button that performs the same
functions as the amplifier.
In order to program the mast amplifier, the power supply has wireless connectivity
and is compatible with smartphones or tablets. By using the ASuite app,
you can configure the following parameters: channel programming, output
level, manual level adjustment and enabling/disabling power supply to inputs.
The wireless signal is off every two hours of operation to improve the energy
performance and optimize the use of the RF spectrum.