Skip to the beginning of the images gallery

Vonets VAP11AC WiFi Bridge, Ethernet to WLAN converter, 1200Mbps

Be the first to review this product

Only 10 left in our own stock

In our stock.

SKU

VAP11AC

Turns any device with RJ-45 port into a WLAN device.

Qty

€44.90

Details

WiFi Bridge turns your LAN device into a WLAN device. Now you can throw away your ethernet cables and use WLAN instead. WiFi Bridge is connected to the ethernet connector of the device you want to turn into a WLAN device. Your device is using ethernet/LAN connection which is transferred to WiFi by the WiFi bridge. No drivers needed and no WiFi support needed from your device. WiFi Bridge takes power from USB. You can just connect the USB cable to your newly made WLAN device or you can buy a separate USB charger. Check beside. Really useful for example with IP cameras, Dreamboxes and other STBs, Playstation 3 (PS3), XBOX360 and so on.

Installation (configuring which WiFi network the WiFi bridge will use): Connect to PC and follow the instructions. Installed with internet browser so is compatible with all systems.

If you need to reset VAP11AC: Power on the device. Wait 60 seconds. Long press reset button until 5 seconds. The green light will flash a few times. Then the device will automatically reset to the factory default parameters (it will take about 60 seconds to reset the device). During the factory recovery (reset) operation, the product can’t be powered off. Otherwise it may cause the product to damage.

More Information

Brand

Vonets

Manufacturer's description

Description

1. Support wide voltage DC5-15V power supply, two-stage automatic overvoltage protection;
2. Suppot both 2.4G and 5G band;
3. RF power: 2.4G--14.5dBm, 5G 21dBm/23dBm Adjustable;
4. Support WiFi transmission protocols such as 802.11ac and 802.11n;
5. WiFi transmission rate: 300Mbps (2.4G) + 900Mbps (5G);
6. Point-to-point barrier-free maximum transmission distance: 300 meters (802.11A);
7. Support connecting more than 20pcs WiFi terminal at the same time;
8. Adopt temperature compensated auto frequency control technology (TAFC), WiFi signal is more stable and not easy to drop;
9. Original creation VDNS virtual domain configuration technology to solve the user’s trouble of configuration;
10. Built-in heat sink with convection cooling holes on both sides of the housing for more efficient heat dissipation;
11. WiFi intelligent bridge function, wireless to wired, wired to wireless intelligent switching;
12. Support manually close SSID broadcast, manually close WiFi hardware;
13. Support WEB management, Chinese and English configuration interface;
14. Support SSA signal strength detection and reporting function to realize WiFi mobile positioning;
15. Working environment temperature: -40 ° C to 55 ° C;
16. Support IP layer transparent transmission and MAC layer transparent transmission two bridge modes to meet various bridge applications:
       IP layer transparent transmission (factory default), transparent transmission of IP layer data, can meet most of the bridge applications;
      MAC layer transparently transmits all data above the MAC layer (link layer) and the MAC layer, including IP layer data;
      MAC transparent transmission can solve some special applications for MAC layer encryption, such as GoPro camera, Cisco AP, Hikvision monitoring system, etc.

Specifications

Protocol Standards	IEEE 802.11ac, IEEE 802.11a; IEEE 802.11n, IEEE 802.11g, IEEE 802.11b;
Transmission rate	2.4GHz band: 300Mbps 5GHz band: 900Mbps
External interface	A USB/DC power cable; A set of 10/100m adaptive Ethernet cable
Button	Reset button (long press 5 seconds, then release, the device will automatically restore the factory )
LED	Status instruction: Ethernet port status light (Yellow); 2.4G WiFi connection status light (Blue); 5G WiFi connection status light (Green);
Antenna	Built-in 2pcs Smart omnidirectional 2.4G Antennas, 1.5dbi; Built-in 2pcs Smart omnidirectional 5G Antennas, 1.5dbi;
Product size	94mm x 45mm x 15mm（L x W x H）
Item weight	72g