Be the first to review this product
Promax RANGER Neo+ Professional DVB-S2/C2/T2, WiFi & 4G Measuring Tool - no return right
Brand | Promax |
---|---|
Manufacturer's description | Promax RANGER Neo+ on uusimman sukupolven kentänvoimakkuusmittari. Kunnon työkalu tosiammattilaisille. Mittaukset onnistuvat kaikista DVB-T2, DVB-C2 ja DVB-S2 HD-signaaleista sekä DVB-T, DVB-C ja DVB-S digisignaaleista MPEG-2 ja MPEG-4 pakkauksilla. Yksi RANGER Neo+ -mittalaitteen merkittävimmistä uusista ominaisuuksista on ultra-nopea spektrianalysaattori. Käytössä tämän huomaa heti nopeampana ja tarkempana spektrin pyyhkäisynä. 2.4 GHZ WIFI-MITTAUKSET (5.0 GHZ OPTIO)WiFi-verkkojen häiriöt johtuvat yleensä toisista WiFi-laitteista, kuten päällekkäisistä Access Pointeista (tukiasemista), mutta myös samalla taajuusalueella toimivat laitteet, kuten valvontakamerat ja mikroaaltouunit. Ranger Neo näyttää reaaliaikaisen spektrin ja Access Pointien datatiedot yhdellä näytöllä. SSID, RSSI, SNR, suojaus jne sekä tiedot samalla kanavalla operoivista laitteista auttaa selvittämään verkon kipupisteitä. MITTAUS LTE-SIGNAALEILLE JA SIGNAALIEN AIHEUTTAMILLE HÄIRIÖILLERANGERNeo:ssa on erilaisia työkaluja LTE-häirioiden mittaamiseen SMATV-järjestelmissä. Voit vertailla vastaanotetun signaalin laatua LTE-suodattimen kanssa ja ilman sitä. Asennatko 4G-antenneja? Ranger Neo+ löytyy työkalut 4G-antennien suuntaukseen. Spektrissä saa näkyviin signaalin minimi ja maksimi tasot, mikä on erittäin tärkeä mittaus 4G-antenneja suunnattaessa. SUURIN JA KIRKKAIN NÄYTTÖ – KOLME NÄKYMÄÄ YHDELLÄ VILKAISULLARanger Neo+ 7” näyttö on markkinoiden suurin ja kirkkain. Tämä takaa erinomaisen luettavuuden myös kirkkaassa auringonpaisteessa. Korkearesoluutionäyttö mahdollistaa useamman toiminnan yhtäaikaisen esittämisen. Uusimman prosessoritekniikan ansiosta näytössä voidaan esittää useita mittaustoimintoja yhdellä kertaa. Kuvaa, mittausarvoja ja spektriä voidaan tarkastella samanaikaisesti. Näkymät voidaan sijoittaa vierekkäin tai ruutu voidaan jakaa osiin. OMINAISUUKSIA:
|
DVB-compatibility | DVB-C2 (cable), DVB-C (cable), DVB-S (satellite), DVB-S2 (satellite HD), DVB-T (terrestrial), DVB-T2 (terrestrial HD) |
DVB tuners | 1 x DVB-C (cable), 1 x DVB-C2 (cable), 1 x DVB-S (satellite), 1 x DVB-S2 (satellite), 1 x DVB-T (terrestrial), 1 x DVB-T2 (terrestrial) |
Display size | 7" |
Blindscan | No |
Country of Manufacture | Spain |
Warranty | 24 months |
Household terrestrial antenna guide
Instructions for TV antenna installation, information about different antenna systems and terminology in finnish offered by Suomen antenni- ja teleurakoitsijaliitto ry:n Pientalon antenniopas.
Antennas
If you want to choose all you need easily please check our Terrestrial antenna sets. Please also check our TV antennas and our Terrestrial antenna recommendations for different circumstances.
You can also find radio antennas, satellite antennas and satellite sets in our webshop.
Amplification
Some antennas have built-in amplifiers. Most Televés antennas have intelligent BOSSTech amplifiers that are adjusted atumatically as the signal level changes. You can also find separate amplifiers and power supplies in our webshop.
Antenna signal distribution
You can find our best quality but low-cost antenna cables with connectors or without connectors and separate connectors and adapters.
You can distribute terrestrial antenna signal from one distribution point to all reception points in even level or you can use a main line and taps to get uneven level outputs in different points of the main line. Or you can combine these.
Splitters are used to distribute even level signal from 1 point to all reception points. This is easy and clear. You need a splitter with enough outputs to all reception points.
Taps might be more useful in some situations like long buildings. Taps must be chosen so that first taps get smaller part of the signal so that the main line signal stays strong enough until the end of the main line.
Reception points must have antenna wall sockets that allow you to get each type of antenna signals (terrestrial, satellite and radio) to TVs, DVB receivers and radios.
Combiners allow you to combine different type of antenna signals to 1 cable outside. Then you only need 1 cable to go to the distribution point inside.
Grounding helps to protect your equipment from lightning damages.
Tools
Terrestrial antenna meters allows you to direct your antenna by giving you the signal level coming from the antenna. More advanced models also tell you the signal quality and more detailed channel specific information. Some models even allow you to view TV on the meter screen.
Cable strippers, pliers for installing connectors, installation tools and connecting tools can be found in our tools.
Card readers
If you want to watch pay-tv channels, you also need a separate Antenna HD Ready CI+ CAM for your TV.
DVB receivers
All our terrestrial receivers are compatible with free DVB-T and DVB-T2 TV channels in Finland and in other countries. Some of our terrestrial receivers are also compatible with pay-tv terrestrial channels when a separate Antenna HD Ready CI+ CAM is used. Some of our terrestrial receivers also support more advanced features like 10-20 TV channel simultaneous recording and can be adjusted to your needs. Please also check our Best receivers comparison.
Problem situations
Do you have no idea which cable goes to which room? If you have a lot of cables and don't know which one goes where, you can use a tester.
LTE filter might help if 4G or 5G traffic creates problems for TV channels. Problems might be bigger when there is a lot of 4G or 5G traffic (for example evenings in residential areas).
Ratings & Reviews
Be the first to review this product