Teltonika TRB500 Gateway, 4 x SMA female for 4G antennas, unlocked

Details

Teltonika has named its TRB series "Gateway" because the device has only 1 Ethernet port and no WiFi. However, it is a fully functional router with firewall features. If the TRB is connected to a WiFi router or WiFi Mesh system, it does not matter whether it is Teltonika's TRB (Gateway) or RUT (Router) series.

Capable of 5G speed up to of 1 Gbps.
4G CAT20 compatible.

With a 4x4 MIMO antenna (not included) you can get almost anywhere significantly increased internet speed if the operators base station is further away.

More Information

Brand

Teltonika

Manufacturer's description

The TRB500 gateway is a compact-sized and energy-efficient industrial gateway with a Gigabit Ethernet interface and two configurable I/Os, allowing high-level customization and implementation of a multitude of scenarios.

This device enables 5G network speeds with ultra-low latency for mission-critical infrastructures and high data throughput, ensured by 4 external antennas that allow the use of 4x4 MIMO.

TRB500 comes with the RutOS operating system, which provides advanced security features and compatibility with our Remote Management System (RMS) for optimized remote management and monitoring capabilities of large fleets of devices.

5G: Ultra-high cellular speeds of up to 1 Gbps

SA & NSA: Supports both architectures to leverage the 5G infrastructure

Compactness: One of the smallest 5G gateways available in the market

Future-proofing: Backward compatible with 4G (LTE CAT 20) and 3G network technologies

Mobile

Mobile module	5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
Status	Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
SMS/Call	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
USSD	Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list	Operator black/white list
Band management	Band lock, Used band status display
APN	Auto APN
Bridge	Direct connection (bridge) between mobile ISP and device on LAN
Passthrough	Gateway assigns its mobile WAN IP address to another device on LAN

Ethernet

LAN	1 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover

Security

Authentication	Pre-shared key, digital certificates, X.509 certificates
Firewall	Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Attack prevention	DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN	Port and tag-based VLAN separation
Mobile quota control	Set up custom data limits for SIM card
WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control	Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN	Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption	DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
GRE	GRE tunnel
IPsec	IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
PPTP, L2TP	Client/Server services can run simultaneously, L2TPv3 support
SSTP	SSTP client instance support
STUNNEL	Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN	Method of building scalable IPsec VPNs
WireGuard	WireGuard VPN client and server support
ZeroTier	ZeroTier VPN

Input/output

Configurable I/O	2 x Configurable Inputs/Outputs. Digital input 0 - 5 V detected as logic low, 8 - 40 V detected as logic high. Open collector output, max output 30 V, 300 mA
Output control	HTTP POST/GET, Schedule
Events	SMS, EMAIL
I/O juggler	Allows setting certain I/O conditions to initiate event

Power

Connector	4-pin industrial DC power socket
Input voltage range	9 – 30 VDC, reverse polarity protection, surge protection >33 VDC 10us max
Power consumption	Idle: <3 W, Max <6 W

Physical interfaces

Ethernet	1 x RJ45 port, 10/100/1000 Mbps
I/Os	2 x Configurable I/O pins on 4-pin power connector
USB	1 x Virtual network interface via micro USB
Status LEDs	3 x connection type status LEDs, 3 x connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM	1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power	1 x 4-pin DC power connector
Anntena	4 x SMA for Mobile
Reset	Reboot/User default reset/Factory reset button
Grounding	Grounding screw terminal

EAN

4779051840236

Mobile Generation

4G, 5G NSA, 5G SA

4G Carrier Aggregation

1 frequency, 2 frequencies, 3 frequencies, 4 frequencies, 5 frequencies

Frequency Bands

All 4G frequencies 700-2600MHz (whole Finland), Usual 5G/4G frequencies 700-3500MHz (whole Finland), 5G/4G 700MHz (most rural areas), 4G 800MHz (rural area), Helium 865MHz (EU), 3G 900MHz (rural area), GSM 900MHz (rural area), 3G 1800MHz (urban area), GSM 1800MHz (urban area), 4G 1800MHz (urban area), 5G/4G 2100 MHz (urban area), 5G/4G 2600 MHz (city areas), 5G 3.5 GHz (cities)

4G/5G antenna connectors

4 x SMA female

Dual sim

No

Manufacturer product link

teltonika-networks.com/

Country of Manufacture

Lithuania

Warranty

24 months

Reviews

Ratings & Reviews